Renesas SH7641 Technical Information PDF herunterladen (Seite 99)

3.19.2 AUD Trace Function

This function is operational when the AUD pin of the MCU is connected to the emulator.

The following is the procedure for setting the AUD trace function (this function does not need to

be set in an emulator that does not support the internal trace function):

1. Select [Trace] from the [View] menu.

2. Click the [Trace] window with the right mouse button and select [Acquisition] from the

pop-up menu to display the [Trace Acquisition] window.

3. Select the [AUD trace] radio button in the [Trace type] group box.

Figure 3.56 [Trace mode] Window

Note: For a description of each option, refer to table 3.4.

Note: The items that can be set in this window differ according to the product. For the

settings for each product, refer to the online help.

The trace results are displayed in the [Trace] window after the program execution is completed.

The display specifications in the [Trace] window are the same as the internal trace function.

1 2 ... 94 95 96 97 98 99 100 101 102 103 104 ... 249 250

Keine Kommentare

Renesas SH7641 Technical Information Seite 99