Renesas SH7641 Technical Information PDF herunterladen (Seite 140)

118

Description:

The [Break Point] dialog box consists only of the [Address] page. This dialog box sets address

conditions and address areas. The [Address] page options are as follows:

Table 4.11 [Address] Page Options

Option Description

[Value] edit box Sets a breakpoint address with a number or a symbol.

[Normal] radio button Does not set an address area.*

[Physical Space] radio button Shows that the break condition is the physical area.*

[Virtual Space] radio button Shows that the break condition is the virtual area.*

[ASID] edit box Sets an ASID value (0 to 255) when the breakpoint address is in

the virtual area. Nothing is set as default.*

Note: These options are not supported in a device in which the MMU is not built-in.

Clicking the [OK] button enables breakpoints to be set. If the [Cancel] button is clicked, this

dialog box is closed without setting breakpoints.

Related Commands:

BREAKPOINT command

BREAKPOINT_CLEAR command

BREAKPOINT_DISPLAY command

BREAKPOINT_SET command

1 2 ... 135 136 137 138 139 140 141 142 143 144 145 ... 249 250

Keine Kommentare

Renesas SH7641 Technical Information Seite 140