Renesas SH7641 Technical Information PDF herunterladen (Seite 156)

134

Description:

This window displays the trace buffer contents. The items listed in table 4.21 are displayed.

Table 4.21 [Trace] Window Display Items

Item Description

[No.] Displays the number in ascending order as the trace stop point is 0 (signed

decimal).

[IP] Displays the instruction pointer (signed decimal).

[TYPE] For the branch instruction trace, displays the information type, that is, branch

source or branch destination.

BRANCH: Branch source

DESTINATION: Branch destination

[ADDR/DATA] For the branch instruction trace, displays the branch source or branch destination

address.

[MNEMONIC] Displays the execution instruction mnemonic.

[OPERAND] Displays the execution instruction operand.

[Source] Displays the C-source line of the address that the trace has been acquired.

The pop-up menu, opened by clicking the right mouse button, can be used to set, change, and

clear trace conditions. For details, refer to the Hitachi Debugging Interface User’s Manual.

Notes:

1. In some cases, the emulator address may be acquired by trace. In such a case, the

following message will be displayed. Ignore this address because it is not a user program

address.

*** EML ***

2. The [Halt] menu in the pop-up menu is active only when the [Trace] window is open

during user program execution. When the internal trace is used, realtime emulation cannot

be performed by using the [Halt] menu.

Related Command:

TRACE_DISPLAY command

1 2 ... 151 152 153 154 155 156 157 158 159 160 161 ... 249 250

Keine Kommentare

Renesas SH7641 Technical Information Seite 156