
143
5.2 Command Descriptions
The command list of the E10A emulator is shown below.
Table 5.1 E10A HDI Commands
No. Command Abb. Function
1 AUD_CLOCK AUCL Sets the AUD clock (AUDCK).
2 AUD_MODE AUM Sets AUD trace conditions.
3 AUD_TRACE AUT Displays trace information.
4 BREAKCONDITION_
CLEAR
BCC Clears hardware breakpoints that have been set.
5 BREAKCONDITION_
DISPLAY
BCD Displays hardware breakpoints that have been set.
6 BREAKCONDITION_
ENABLE
BCE Enables or disables hardware breakpoints that have
been set.
7 BREAKCONDITION_
SET
BCS Sets hardware breakpoints.
8 BREAKPOINT BP Sets software breakpoints.
9 BREAKPOINT_CLEAR BC Clears software breakpoints that have been set.
10 BREAKPOINT_DISPLAY BD Displays software breakpoints that have been set.
11 BREAKPOINT_ENABLE BE Enables or disables software breakpoints that have
been set.
12 DEVICE_TYPE DE Displays device type currently selected.
13 GO_OPTION GP Displays or sets the emulation mode during user
program execution.
14 JTAG_CLOCK JCK Displays or sets a JTAG clock (TCK) frequency.
15 MEMORYAREA_SET MAS Displays or sets memory area at command input, such
as load, verify, save, memory display, or memory
change.
Kommentare zu diesen Handbüchern