Renesas SH7641 Technical Information PDF herunterladen (Seite 92)

Set hardware break conditions as follows:

Break condition 1: When address H'0c0000c6 is accessed in a read cycle, a break condition is

satisfied.

Break condition 2: When address H'0c0000b2 is accessed in a read cycle, a break condition is

satisfied.

Follow the setting method described in the previous section.

• When Break Condition 1,2 setting has been completed, the state of the [Breakpoints] window

is as follows.

Figure 3.51 [Breakpoints] Window (After Sequential Break Condition Setting)

• Close the [Breakpoints] window.

• Set the program counter and stack pointer values (PC = H’0c00006c and R15 = H’0c000c00)

that have been set in section 3.9, Setting Registers, in the [Registers] window. Click the [Go]

button.

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 249 250

Keine Kommentare

Renesas SH7641 Technical Information Seite 92