Renesas SH7641 Technical Information PDF herunterladen (Seite 197)

175

5.2.19 STEP_INTERRUPT: SI

Description:

Sets or displays the enable or disable status of interrupts during step execution. If enabled,

interrupts occur and stop at the top address in the interrupt routine.

Format:

Displays the enable or disable status of interrupts during step execution.

Sets the enable or disable status of interrupts during step execution.

si <mode>

Table 5.20 STEP_INTERRUPT Command Parameter

Parameter Type Description

<mode> Keyword Enables or disables interrupts during step execution.

Set either of the following:

enable: Enables interrupts.

disable: Disables interrupts.

Example:

To enable interrupts during step execution:

si enable (RET)

To display interrupt status during step execution:

>si (RET)

Emulator step interrupt mode = ENABLE

1 2 ... 192 193 194 195 196 197 198 199 200 201 202 ... 249 250

Keine Kommentare

Renesas SH7641 Technical Information Seite 197