Renesas User System Interface Board HS7047ECH61H Bedienungsanleitung PDF herunterladen (Seite 148)

High: The status of the IRQ signal is high.

Low: The status of the IRQ signal is low.

[Timestamp]: Sets the time stamp condition.

[Don't care]: Detects no time stamp value when this box is checked.

[Setting]: Detects the specified time stamp value.

[Point]: Specifies a single time stamp.

[Range]: Specifies a time stamp range.

[From]: Enter a single time stamp value or the minimum value of the time stamp

range.

The format is as follows:

hour: h, minute: min, second: s, millisecond: ms, microsecond: us,

nanosecond: ns

[To]: Enter the maximum value of the time stamp range.

The format is the same as that in [From].

Set filtering conditions and then press the [OK] button. This starts filtering according to the conditions. Clicking

the [Cancel] button closes the [Trace Filter] dialog box, which holds the settings at the time when the dialog box

was opened.

In filtering, only the trace information that satisfies one or more filtering conditions set in the above pages will

be displayed in the [Trace] window.

Filtering conditions can be changed several times to analyze data because the content of the trace buffer is not

changed by filtering.

1 2 ... 143 144 145 146 147 148 149 150 151 152 153 ... 242 243

Keine Kommentare

Renesas User System Interface Board HS7047ECH61H Bedienungsanleitung Seite 148