Renesas User System Interface Board HS7047ECH61H Bedienungsanleitung PDF herunterladen (Seite 127)

[Back]: Puts the setting back to the previous state at the time the dialog box has been

displayed.

List box: Displays the current settings for each of the channels. R shown as the channel number

indicates that a reset point is set for a sequential break. If no setting has been made for

a channel, only the channel number is displayed here. When a channel is used for the

sequential break function, S is displayed next to the channel number.

[Edit…]: Clicking this button opens the [On Chip Break Channel n] dialog box (n: channel

number), which allows the user to set a break condition for a selected channel.

[Reset]: Clears the settings made for the selected channel.

[Reset All]: Clears the settings made for all of the channels.

The user can set more complex break conditions in the [On Chip Break Channel n] dialog box by a combination

of conditions provided on pages [Address], [Data], [Bus/Area], [Count], and [Action].

Figure 3.23 [On Chip Break Channel n] Dialog Box

1 2 ... 122 123 124 125 126 127 128 129 130 131 132 ... 242 243

Keine Kommentare

Renesas User System Interface Board HS7047ECH61H Bedienungsanleitung Seite 127