Renesas User System Interface Board HS7047ECH61H Bedienungsanleitung PDF herunterladen (Seite 138)

List box: Displays the current settings for each of the channels. If no setting has been made for

a channel, only the channel number is displayed here. When a channel is used for the

sequential trace stop function, S is displayed next to the channel number. When a

reset condition for a sequential trace stop is enabled, R is displayed next to channel 8.

PtoP is for use in the Point to Point trace. UNUSED is displayed next to the channel

number if that channel is not available.

[Edit…]: Clicking this button opens the [Trace Acquisition Condition Channel n] dialog box (n:

channel number or PtoP), which allows the user to set a break condition for a selected

channel.

[Reset]: Clears the settings made for the selected channel.

[Reset All]: Clears the settings made for all of the channels.

1 2 ... 133 134 135 136 137 138 139 140 141 142 143 ... 242 243

Keine Kommentare

Renesas User System Interface Board HS7047ECH61H Bedienungsanleitung Seite 138