
PALMiCE3 AUD360 model Hardware Manual Chapter 2 PALMiCE3 AUD360 Hardware Specifications 6
2.1 PALMiCE3 AUD360 model hardware specifications
PALMiCE3 is a purpose-built debugger for utilizing on-chip debugging feature incorporated in the CPUs made by
Renesas Electronics.
PALMiCE3 incorporates on-chip debugging feature to provide the following functionalities.
Execution and break of the user program
Break by matching any address and data
Force break of the user program
Trace and step executions
Viewing and editing of memory, register, and I/O
Large-capacity branch tracing with time stamp
This chapter spells out specifications of PALMiCE3 hardware.
2.2 AUD360 model specifications
Item AUD360 model specifications
Supported CPUs
SH-Mobile
SuperH family
Branch tracing memory for AUD Max. 512K frame
Time stamp (Branch tracing memory) 32-bit (Clock 1us or 50nS to choose from)
Specification of the connector 36-pin MDR connector (Cable length: Approx. 33cm)
Interface
*1
Specification of the connector on the
target system side
3M-made 10236-52A2JL
Target interface voltage
Output
*2
: 1.2V - 3.6V (Follows target) or fixed to 3.3V
Input : 5V-torelant
LED ・PWR ・BSY ・STS
Outside dimensions 95mm(W)X70mm(D)X21mm(H) (Exclusive of connector)
Operating environment
Operating temperature: 5℃ to 40℃
Operating humidity: 35% to 85%RH No condensation
USB host interface USB(Ver2.0)
AC adapter Not required (Vbus support)
Current consumption DC5V ±5% Max. approx. 350mA (from USB VBus)
Weight 78g
*1 : Support also available for 14-pin MIL connector and 38-pin Mictor connector with optional dedicated adapters.
*2 : In the case of
TRST signal, it will be 1.8V - 5.5V (Follows target)
MDR connector: 36-pin connector that supports AUD interface
MIL connector: 14-pin connector that supports H-UDI interface
Not
Kommentare zu diesen Handbüchern