Renesas SuperH SH7343 Technical Information PDF herunterladen (Seite 181)

PALMiCE3 HUDI140 model Hardware Manual Chapter 1 Getting Started 4

1.3 Connection structure

PALMiCE3 is to be connected to the host computer with the USB cable included with the product. PALMiCE3 is

to be connected to the target system with the H-UDI cable included with the product. Also, RSTOUT probe is to

be connected as required. For details on RSTOUT probe and the target interface, see the next chapter.

To use PALMiCE3, the interface connector for PALMiCE3 use needs to be mounted on the target system

beforehand.

PALMiCE3 HUDI140 model

Connection structure

When connecting the hardware,

if you put too much pressure, stress, or strain on the connector, doing so may cause damage.

Be careful not to put too much pressure or try not to strain or put stress on the connector.

About H-UDI cable specifically for PALMiCE3

・ Make sure to use PALMiCE3-specific H-UDI cable made by Computex.

・ When establishing connections, connect the connector with a tag ([1] in the illustration) to the target

system.

For connection to the target system, optional products such as conversion adapter are available.

Not

Info.

Not

1 2 ... 176 177 178 179 180 181 182 183 184 185 186 ... 203 204

Keine Kommentare

Renesas SuperH SH7343 Technical Information Seite 181