Renesas SuperH SH7343 Technical Information PDF herunterladen (Seite 184)

PALMiCE3 HUDI140 model Hardware Manual Chapter 2 PALMiCE3 HUDI140 Hardware Specifications 7

2.3 Name and function of each part

Appearance drawing of PALMiCE3 HUDI140 model is given to the following.

[1] PWR LED

Comes on when the power is supplied to PALMiCE3. Power is

supplied from the host computer through USB cable.

[2] BSY LED

Flickers during communication between PALMiCE3 and the target

CPU.

[3] STS LED

Lit normally during user program execution.

Also, flashes in some cases to notify errors.

For details, refer to the user's manual.

[4] TARGET connector

14-pin connector for connecting PALMiCE3 to the target system.

[5]

RST

Connect RSTOUT probe to be connected to reset circuit in the target

system. (When using PALMiCE3 SuperH)

[6] EXT

Currently not used.

[7] Power switch

Turns ON/OFF the PALMiCE3’s power. Power input state can be checked with

[1] POWER LED.

[8] USB connector

Connect USB cable. (mini-B type connector)

2.3.1 RSTOUT probe

■ When using PALMiCE3 SuperH

RSTOUT probe is to be used when you are using PALMiCE3

HUDI140 model and outputting reset signal to the target

system.

1 2 ... 179 180 181 182 183 184 185 186 187 188 189 ... 203 204

Keine Kommentare

Renesas SuperH SH7343 Technical Information Seite 184