Renesas SuperH SH7343 Technical Information PDF herunterladen (Seite 183)

PALMiCE3 HUDI140 model Hardware Manual Chapter 2 PALMiCE3 HUDI140 Hardware Specifications 6

2.1 PALMiCE3 HUDI140 model hardware specifications

PALMiCE3 is a purpose-built debugger for utilizing on-chip debugging feature incorporated in Renesas

Electronics-made CPU.

PALMiCE3 incorporates on-chip debugging feature to provide the following functionalities.

 Execution and break of the user program

 Break by matching any address and data

 Force break of the user program

 Trace and step executions

 Viewing and editing of memory, register, and I/O

This chapter spells out specifications of PALMiCE3 hardware.

2.2 HUDI140 model specifications

Item HUDI140 model specifications

Supported CPUs

SH-Mobile

SuperH RISC engine family

H8SX family

H8S family

R8J family

Specification of the connector 14-pin MIL connector (Cable length: Approx. 20cm)

Interface

Specification of the connector on

the target system side

OMRON-made XG4C-1431 (14-pin)

Target interface voltage

1.65V - 5.5V （Follows target）

Note, for 5V-spec CPUs, output level will be min. 4.2V - max. 4.7V.

LED ・PWR ・BSY ・STS

Outside dimensions 95mm(W)×70mm(D)×21mm(H) (Exclusive of connector)

Operating environment

Operating temperature：5℃ to 40℃

Operating humidity：35% to 85%RH No condensation

USB host interface USB(Ver2.0)

AC adapter Not required (Vbus support)

Current consumption DC5V ±5% Max. approx. 250mA (from USB VBus)

Weight 78g

*1: With the exception of SH7050 series

*2: Support also available for 36-pin MDR connector and 38-pin Mictor connector with optional dedicated adapters.

MIL connector: 14-pin connector that supports H-UDI interface

MDR connector: 36-pin connector that supports AUD interface

Not

1 2 ... 178 179 180 181 182 183 184 185 186 187 188 ... 203 204

Keine Kommentare

Renesas SuperH SH7343 Technical Information Seite 183