Renesas M3A-2152 Technical Information PDF herunterladen (Seite 30)

Hardware Setup

M3A-2114 User’s Manual (28/68)

5.2 Hardware Setup when M3A-2114G52/ G62/ G72 in use

5.2.1 M3A-2195 Power Supply Connection and Settings

The following shows how to set M3A-2195.

For more details, refer to M3A-2195 User’s Manual.

Power to the M3A-2195 SDI Interface Board can be fed from either a 5V DC power supply (5 V) or a 12 DC power

supply (6-12 V). Use the included 5V or 12V power supply cables to connect M3A-2195 and a corresponding DC

power supply.

The method for connecting them is shown in Figure 5.2-1

Figure 5.2-1 Feeding Power to M3A-2195

5.2.2 Connecting to Host PC

In order to control the M3A-2195 SDI Interface Board from M3S-KD32R installed in the host PC, the host PC’s LPT

parallel port and the M3A-2195’s J1 connector should be connected with the parallel cable included in M3A-2195.

The method for connecting the host PC and M3A-2195 is shown in Figure 5.2-2.

Figure 5.2-2 Connecting the M3A-2195 and Host PC

M3A-2195

J3Feeding from 12V DC ( 6 - 12V )

Feeding from 5V DC ( 4.5 - 5.5V )

JP1

3 JP1 1

Jumper connector

When feeding from DC 12V(J3)

When feeding from DC 5V(J4)

(set as default when shipped from

factory)

Settings of JP1

M3A-2195

Parallel cable

Connect to

the host PC’s

LPT parallel port.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 69 70

Keine Kommentare

Renesas M3A-2152 Technical Information Seite 30