
139
Section 2 Preparation before Use
2.1 Emulator Preparation
Unpack the emulator and prepare it for use as follows:
WARNING
READ the reference sections shaded in figure 2.1 before using the
emulator product. Incorrect operation will damage the user system and
the emulator product. The USER PROGRAM will be LOST.
Section 3
Section 4
Unpack the emulator
Check the components against
the component list
Start the HEW
Turn on the user system
(Only when the user system is connected)
Turn on the emulator
Component list
Setup
Activation
Reference
Set up the emulator
- Insert the optional board
- Install the HEW
- Connect the interface cable
Figure 2.1 Emulator Preparation Flowchart
2.2 Installing Emulator’s Software
To install the HEW, refer to the Setup Guide for the E6000 Emulator supplied together with the emulator.
Kommentare zu diesen Handbüchern