Renesas SuperH SH7710 E10A Technical Information PDF herunterladen (Seite 29)

(a) Branch Trace Function

The branch source and destination addresses and their source lines are displayed.

Branch trace can be acquired by selecting the [Branch trace] check box in the [AUD function]

group box of the [Trace mode] page.

The branch type can be selected in the [AUD Branch trace] page.

Figure 2.2 [AUD Branch trace] Page

(b)

Window Trace Function

Memory access in the specified range can be acquired by trace.

Two memory ranges can be specified for channels A and B. The read, write, or read/write

cycle can be selected as the bus cycle for trace acquisition.

[Setting Method]

(i)

Select the [Channel A] and [Channel B] check boxes in the [AUD function] group

box of the [Trace mode] page. Each channel will become valid.

(ii) Open the [Window trace] page and specify the bus cycle and memory range that are to be

set for each channel.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 41 42

Keine Kommentare

Renesas SuperH SH7710 E10A Technical Information Seite 29