Renesas SuperH SH7710 E10A Technical Information PDF herunterladen (Seite 13)

Pin 1 mark

Notes:

1. Input to or output from the user system.

2. The slash (/) means that the signal is active-low.

3. The emulator monitors the GND signal of the user

system and detects whether or not the user system

is connected.

25.0

23.0

6 x 2.54 = 15.24

(2.54)

0.45

Pin 1 mark

H-UDI port connector

(top view)

H-UDI port connector

(top view)

Pin No. Signal

10, 12,

and 13

TCK

/TRST

TDO

/ASEBRKAK

TMS

TDI

/RESETP

N.C.

(GND)

UVCC

GND

Input/

Output*

GND

Output

Input

Output

Input

I/O

Output

4. If the VccQ pin is not connected to the UVCC, the I/O voltage

of the user system interface will be fixed to 3.3 V.

The /ASEMD0 pin must be 0 when the emulator is connected

and 1 when the emulator is not connected, respectively.

(1) When the emulator is used: /ASEMD0 = 0 (ASE mode)

(2) When the emulator is not used: /ASEMD0 = 1 (normal mode)

To allow the /ASEMD0 pin to be GND by connecting the user system

interface cable, connect pin 9 directly to the /ASEMD0 pin. Do not ground the pin.

Note

User reset

SH7710

Pin No.

202

201

200

203

199

198

215

Unit: mm

Figure 1.2 Pin Assignments of the H-UDI Port Connector (14 Pins)

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 41 42

Kommentare zu diesen Handbüchern

Keine Kommentare

Renesas SuperH SH7710 E10A Technical Information Seite 13

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Renesas SuperH SH7710 E10A