Renesas R8C/17 Technical Information Seite 5

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 40
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 4
R8C/16 Group, R8C/17 Group 1. Overview
Rev.2.00 Jan 30, 2006 Page 3 of 35
REJ03B0101-0200
NOTES:
1. I
2
C bus is a trademark of Koninklijke Philips Electronics N. V.
Table 1.2 Performance Outline of the R8C/17 Group
Item Performance
CPU Number of Basic Instructions 89 instructions
Minimum Instruction Execution
Time
50ns(f(XIN)=20MHz, VCC=3.0 to 5.5V)
100ns(f(XIN)=10MHz, VCC=2.7 to 5.5V)
Operating Mode Single-chip
Address Space 1 Mbyte
Memory Capacity See Table 1.4 R8C/17 Group Product Information
Peripheral
Function
Port I/O : 13 pins (including LED drive port),
Input : 2 pin
LED drive port I/O port: 4 pins
Timer Timer X: 8 bits × 1 channel, Timer Z: 8 bits × 1 channel
(Each timer equipped with 8-bit prescaler)
Timer C: 16 bits × 1 channel
(Circuits of input capture and output compare)
Serial Interface 1 channel
Clock synchronous serial I/O, UART
I
2
C bus Interface (IIC)
(1)
1 channel
A/D Converter 10-bit A/D converter: 1 circuit, 4 channels
Watchdog Timer 15 bits × 1 channel (with prescaler)
Reset start selectable, Count source protection mode
Interrupt Internal: 9 factors, External: 4 factors, Software: 4
factors
Priority level: 7 levels
Clock Generation Circuit 2 circuits
Main clock generation circuit (Equipped with a built-in
feedback resistor)
On-chip oscillator (high speed, low speed)
Equipped with frequency adjustment function on high-
speed on-chip oscillator
Oscillation Stop Detection
Function
Main clock oscillation stop detection function
Voltage Detection Circuit Included
Power-on Reset Circuit Included
Electric
Characteristics
Supply Voltage VCC=3.0 to 5.5V (f(XIN)=20MHz)
VCC=2.7 to 5.5V (f(XIN)=10MHz)
Power Consumption Typ. 9mA (VCC = 5.0V, f(XIN) = 20MHz)
Typ. 5mA (VCC = 3.0V, f(XIN) = 10MHz)
Typ.35µA (VCC = 3.0V, wait mode, peripheral clock off)
Typ. 0.7µA (VCC = 3.0V, stop mode)
Flash Memory Program/Erase Supply Voltage VCC=2.7 to 5.5V
Program and Erase
Endurance
10,000 times (Data flash)
1,000 times (Program ROM)
Operating Ambient Temperature -20 to 85°C
-40 to 85°C (D Version)
Package 20-pin plastic mold LSSOP
Seitenansicht 4
1 2 3 4 5 6 7 8 9 10 ... 39 40

Kommentare zu diesen Handbüchern

Keine Kommentare