
R8C/16 Group, R8C/17 Group 1. Overview
Rev.2.00 Jan 30, 2006 Page 8 of 35
REJ03B0101-0200
1.6 Pin Description
Table 1.5 lists the Pin Description and Table 1.6 lists the Pin Name Information by Pin Number.
I: Input O: Output I/O: Input and output
Table 1.5 Pin Description
Function Pin Name I/O Type Description
Power Supply Input VCC
VSS
I Apply 2.7V to 5.5V to the VCC pin. Apply 0V to
the VSS pin
Analog Power Supply
Input
AVCC
AVSS
I Power supply input pins to A/D converter.
Connect AVCC to VCC. Apply 0V to AVSS.
Connect a capacitor between AVCC and AVSS.
Reset Input RESET
I Input “L” on this pin resets the MCU
MODE MODE I Connect this pin to VCC via a resistor
Main Clock Input XIN I These pins are provided for the main clock
generation circuit I/O. Connect a ceramic
resonator or a crystal oscillator between the XIN
and XOUT pins. To use an externally derived
clock, input it to the XIN pin and leave the XOUT
pin open.
Main Clock Output XOUT O
INT
Interrupt INT0, INT1, INT3 I INT interrupt input pins
Key Input Interrupt KI0
to KI3 I Key input interrupt input pins
Timer X CNTR0 I/O Timer X I/O pin
CNTR0
O Timer X output pin
Timer Z TZOUT O Timer Z output pin
Timer C TCIN I Timer C input pin
CMP0_0 to CMP0_2,
CMP1_0 to CMP1_2
O Timer C output pins
Serial Interface CLK0 I/O Transfer clock I/O pin
RXD0 I Serial data input pin
TXD0 O Serial data output pin
I
2
C bus Interface
(IIC)
SCL I/O Clock I/O pin
SDA I/O Data I/O pin
Reference Voltage
Input
VREF I Reference voltage input pin to A/D converter
Connect VREF to VCC
A/D Converter AN8 to AN11 I Analog input pins to A/D converter
I/O Port P1_0 to P1_7, P3_3
to P3_5, P3_7, P4_5
I/O These are CMOS I/O ports. Each port contains
an I/O select direction register, allowing each
pin in that port to be directed for input or output
individually.
Any port set to input can select whether to use a
pull-up resistor or not by program.
P1_0 to P1_3 also function as LED drive ports.
Input Port P4_6, P4_7 I Port for input-only
Kommentare zu diesen Handbüchern