To our customers, Old Company Name in Catalogs and Other Documents On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology C
iPrefaceThe HS7047ECH61H is a user system interface board that connects a user system for the SH7047FP-100M package to the SH7046 E6000H emulator (HS7
iiContentsSection 1 Configuration...1Section 2 Connection Proced
1Section 1 ConfigurationFigure 1 and table 1 show the configuration and components of the user system interface board forthe FP-100M package. Pleas
2CAUTIONUse an IC149-100-054-B51 socket (manufactured byYAMAICHI ELECTRONICS Co., Ltd.) for the FP-100M packageIC socket on the user system.Table 1 HS
3Section 2 Connection Procedures2.1 Connecting User System Interface Board to User SystemWARNINGAlways switch OFF the user system and the emulatorpr
42.1.2 Installing Cable HeadCAUTIONCheck the location of pin 1 before inserting.Align pin 1 on the IC socket for an FP-100M package on the user system
5Screws (M2.6 x 12 mm) with flat washersPin 1BoardIC socket (IC149-100-054-B51 manufactured by YAMAICHI ELECTRONICS Co., Ltd.)User systemFigure 2 Co
62.2 Connecting User System Interface Board to EV-Chip BoardWARNINGObserve the precautions listed below. Failure to do sowill result in a FIRE HAZARD
7Connector No.UCN1 UCN1UCN2 UCN2BoardEV-Chip Board Connector No.Board Connector No.EV-chip boardSpacerUser systemFigure 3 Connecting User System Int
82.3 Recommended Dimensions for User System Mount Pad (Footprint)Figure 4 shows the recommended dimensions for the mount pad (footprint) for the user
Notice 1. All information included in this document is current as of the date this document is issued. Such information, however, is subject to chang
92.4 Dimensions for EV-Chip Board and User System Interface BoardThe dimensions for the EV-chip board and the user system interface board are shown in
102.5 Resulting Dimensions after Connecting User System Interface BoardThe resulting dimensions, after connecting the user system interface board to t
11Section 3 Installing the MCU to the User SystemCAUTION1. Check the location of pin 1 before inserting.2. Use a Philips-type screwdriver whose head
12MCU (SH7047)Screws (M2.6 x 6 mm) with flat washersSocket coverPin 1User systemIC socket (IC149-100-054-B51manufactured by YAMAICHI ELECTRONICS Co.,
13Section 4 Verifying Operation1. Turn on the emulator according to the procedures described in the SH7046 E6000H EmulatorUser's Manual (HS7046
14 To use the crystal oscillator mounted on the EV-chip boardInstall a crystal oscillator into the crystal oscillator terminals on the EV-chip board
15Section 5 Notice1. Before connecting any parts or cables, make sure that pin 1 on the both sides are correctlyaligned.2. Do not apply excessive fo
SH7047 Group FP-100MUser System Interface Board HS7047ECH61H User's ManualPublication Date: Rev.4.00, Januar
1753, Shimonumabe, Nakahara-ku, Kawasaki-shi, Kanagawa 211-8668 JapanSH7047 Group FP-100MUser System Interface BoardREJ10B0039-0400HHS7047ECH61H User
SH7047 Group FP-100MUser System Interface BoardHS7047ECH61H User’s ManualUser’s Manual Rev.4.0 2004.01Renesas Microcomputer Development Environment
CautionsKeep safety first in your circuit designs!1. Renesas Technology Corp. puts the maximum effort into making semiconductor productsbetter and mor
IIMPORTANT INFORMATIONREAD FIRST• READ this user's manual before using this user system interface board.• KEEP the user's manual handy for f
IILIMITED WARRANTY Renesas warrants its user system interface boards to be manufacturedin accordance with published specifications and free from d
IIIState Law: Some states do not allow the exclusion or limitation of implied warranties or liability forincidental or consequential damages, so t
IVSAFETY PAGEREAD FIRST• READ this user's manual before using this user system interface board.• KEEP the user's manual handy for future ref
VWARNINGObserve the precautions listed below. Failure to do sowill result in a FIRE HAZARD and will damage the usersystem and the emulator product or
Kommentare zu diesen Handbüchern