Renesas M16C FAMILY Bedienungsanleitung Seite 10

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 46
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 9
Resistor ladder
(Driver: Large)
Bi-directional bus
(Driver: Optimized)
Resistor ladder
Bi-directional bus(a)
Bi-directional bus (b)
M16C
1/4500
1/12500
Active: 20 MHz (XIN)
1
Power-Down Modes (R8C/2x @ 5V)
1/4
Active: 10 MHz High-speed OCO*
1/77
Active: 125 kHz Low-speed OCO*
Active: 32 kHz (XCIN)
1/333
Stop Mode
Wait: 32 kHz (XCIN)
Power Consumption (relative)
10mA
2.5mA
130µA
30µA
2.2µA
800nA
* OCO = On-chip Oscillator
WDT
Divide by 1
or greater
CPU
Peripherals
Multiple
Dividers
Divider
Select
Timers
Select
Adjust
125
kHz
40
MHz
20
MHz
32
kHz
Clock Generator Circuitry (R8C/2x) ADC Vref Cut-off
Vref
Off
AVss
Analog input
Resistor
A/D
Converter
Low-speed
On-chip Osc.
High-speed
On-chip Osc.
XIN
XCIN
Divider
Stop
Detect
125
kHz
Low-speed
On-chip Osc.
REASON #4: EFFICIENT
Extensive Power Management
Independent clock signal selection for CPU
and peripherals provides great flexibility
for performance and power management
Low-voltage operation down to 2.2V
reduces current consumption while
maintaining a high level of performance
Peripherals such as the ADC can be
physically disconnected from the
power path for lowest power drain
Load Capacitance
Reduction By Optimized
Bi-directional Bus
Load capacitance is distributed by
using separate buses, thereby reducing
the power loss caused by charging and discharging.
In addition, the reduced load capacitance allows increases in
bus operating speeds.
The M16C is ideal for
portable devices because
it has multiple clock
sources and multiple
power-saving modes.
Multiple Clock Sour
ces:
Main clock oscillator
Sub-clock oscillator
On-chip oscillators
External clock
Top Reasons to select the M16C Platform
8
Multiple Clock Sources and Multiple Power-Saving Modes
Multiple Power-saving Modes:
Main clock can be slowed down
Processor can be put to sleep
Processor and/or peripherals can
be driven by 32kHz sub-clock
Peripherals can be individually
powered down
All clocks can be turned off for
the lowest possible power draw
Seitenansicht 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 45 46

Kommentare zu diesen Handbüchern

Keine Kommentare