Renesas M16C/6N Bedienungsanleitung PDF herunterladen (Seite 19)

QDK™

M16C/Neutrino-NC30

www.state-machine.com/m16c

5.2 Linker Options Used

5.2.1 Specifying Program Sections

The HEW IDE allows to specify very precisely all the program sections, as shown in the screen shot

Figure 6. For the NEUTRINO board, the sections are configured according to the memory map

included in Section 6.3 of the “NEUTRINO User’s Manual” [Renesas NEUTRINO].

1. Select

Link Tab

2. Select

Section Order

category

3. Press

Edit

4. Specify sections

according to the

memory map in

the NEUTRINO

User’s Manual

FirmRam_NE section

for “Kernel RAM”

FirmArea_FE section

for “Kernel Program”

Figure 6 Specifying the sections names and addresses in the HEW IDE.

In particular, the Section Order dialog box shows the special RAM section FirmRAM_NE for the

“E8 Work RAM” located at 0x0B00 and the ROM section FirmArea_FE for “E8 Work ROM” at

0xFF000. “Kernel” in the Renesas terminology means ROM-monitor resident in the target and com-

municating with the HEW debugger via the E8 In-Circuit Debugger.

17 of 25

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 25 26 27

Keine Kommentare

Renesas M16C/6N Bedienungsanleitung Seite 19