Renesas Emulator System E8 Betriebsanweisung PDF herunterladen (Seite 20)

CSE8E10-2

Connecting to the target board, E8/E8a

IAR C-SPY® Hardware Debugger Systems

User Guide

7 If a dialog box asks you to confirm that the target board is supplied with power, select

the check box and the correct voltage.

Figure 5: The Power Supply dialog box for the E8/E8a emulator

If this dialog box is not displayed, skip this step.

Note: Before you connect the target board to a power supply, check the power

specifications and that there are no short circuits. Incorrect operation might damage the

board and the emulator.

8 If the ID Code verification dialog box is displayed, enter the hexadecimal ID security

code for the flash memory.

Figure 6: The ID Code verification dialog box for the E8/E8a emulator

When the emulator is ready to be used, Connected will be printed in the IAR

Embedded Workbench Debug Log window together with the number of available

hardware and software breakpoints.

MAINTAINING THE CONNECTION TO THE HARDWARE

When a debug session is started, a connection to the hardware is established and an

initialization routine is executed. The initialization sets the emulator options for your

target system.

When you start a debug session with the same hardware as the previous session and

without closing the IDE between the debug sessions, C-SPY can skip the initialization

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 40 41

Keine Kommentare

Renesas Emulator System E8 Betriebsanweisung Seite 20