Renesas Emulation Pod M306H2T-RPD-E Technical Information PDF herunterladen (Seite 9)

( 7 / 74 )

Terminology

Some specific words used in this user's manual are defined as follows:

PC4701 system

This means an emulator system built around the PC4701 emulator. The PC4701 emulator system is

configured with an emulator main unit PC4701, emulation pod M306H3T3-RPD-E, emulator

debugger M3T-PD30 and host machine.

Emulator main unit PC4701

This means a generic name for emulators for M16C, 7700, 740 Families. Take note of the fact that

the M306H3T3-RPD-E (this product) does not support the PC4701L and PC4700L emulators. For

details on specific models of PC4701, visit the Renesas Tools Homepage at http://www.renesas.com/

en/tools

Emulation pod M306H3T3-RPD-E

The emulation pod M306H3T3-RPD-E (this product) is for the M16C/6H Group M306H3 MCUs.

It is used with the emulator main unit PC4701.

Emulator debugger M3T-PD30

This means a software tool for M16C/60, M16C/30, M16C/20 and M16C/10 Series MCUs. The

M3T-PD30 controls the emulator from the host machine through various interfaces.

Host machine

This means a personal computer used to control the PC4701 system.

Firmware

Program that analyzes contents of communication with the emulator debugger and controls the

emulator hardware. This program is installed in the flash ROM of PC4701 emulator. This program

is downloadable from the emulator debugger to upgrade the firmware or to support other MCUs.

Target MCU

This means the MCU you are going to debug.

User system

This means a user's application system using the MCU to be debugged.

User program

This means an application program to be debugged.

Evaluation MCU

This means the MCU mounted on the emulation pod which is operated in the specific mode for tools.

In this user's manual, this symbol is used to show active LOW (e.g. RESET*: Reset signal).

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 75 76

Keine Kommentare

Renesas Emulation Pod M306H2T-RPD-E Technical Information Seite 9