Renesas Emulation Pod M306H2T-RPD-E Technical Information PDF herunterladen (Seite 40)

( 38 / 74 )

Figure 3.8 Position for mounting network resistors for pullup

3.5 Installing and Removing Network Resistors for Pullup

In this product, you cannot control pullup for ports P0 to P5 by pullup control registers (pullup control

A socket for installing the network resistor for pullup is mounted in this product. Mount the 51 kΩ

network resistor supplied with this product to the port for which pullup control is required. For the

mounting location, refer to Figure 3.8 below.

CAUTION

Note on Installing and Removing Network Resistors for Pullup:

• Always shut OFF power before installing or removing network resistors for pullup.

Otherwise, the internal circuits may be damaged.

• Install network resistors for pullup properly. Otherwise, the emulation pod will be

damaged.

RM1

RM6

VCC

P07

P0P1P2P3P4P5

P17

P27

P37

P47

P57

P06

P16

P26

P36

P46

P56

P05

P15

P25

P35

P45

P55

P04

P14

P24

P34

P44

P54

P03

P13

P23

P33

P43

P53

P02

P12

P22

P32

P42

P52

P01

P11

P21

P31

P41

P51

P00

P10

P20

P30

P40

P50

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 75 76

Kommentare zu diesen Handbüchern

Keine Kommentare

Renesas Emulation Pod M306H2T-RPD-E Technical Information Seite 40

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Renesas Emulation Pod M306H2T-RPD-E