Renesas Emulation Pod M3062PT3-RPD-E Bedienungsanleitung PDF herunterladen (Seite 77)

*All brand names and product names are trademarks or registered trademarks of their respective companies.

Rev.1.00 2004.06 Page 77 of 135

REJ01J0001-0100Z

Rev.1.00

2004.04.16

Function

This accessory tool connects the probe of an emulation pod and the

target, or an MCU and the target. Its dimensions are the same as

those of the MCU for the 42-pin 0.8mm-pitch SSOP (42P2R-A)

package.

It consists of parts (1) to (3) shown in the diagram below.

Attaching Procedure

This converter can be used during debugging and board-mounted

evaluation in common.

When debugging

(1) Mount a socket on the foot pattern on the target.

(2) On top of it, mount the M3T-SSOP42B-450 and a socket

frame in that order.

(3) Then connect the probe of the emulation pod, etc. to the

connector provided at the top of the M3T-SSOP42B-450.

During board-mounted evaluation

Mount an MCU and a socket frame on a socket on the target in that

order.

* : Position of No. 1 pin

Dimensions

① denotes pin numbers on the M3T-SSOP42B-450.

denotes pin numbers of the top of a connector.

Symbol Term Dimensions [mm]

A Fitting height 4.2

b Pin width 0.3

D Package length 8.4

E Package width 17.5

e Interval in row of pins 0.8

HD Overall length 12.4

Foot Pattern Reference Dimensions

See Appendix D "Reference Dimensional Drawings for SSOP

Package Foot Pattern Made by Matsushita Electric Works, Ltd."

[Ordering Information] See Appendix H "Ordering Information".

M3T-SSOP42B-450

Direct Dummy IC for 42-pin 0.8mm-pitch SSOP

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 134 135

Keine Kommentare

Renesas Emulation Pod M3062PT3-RPD-E Bedienungsanleitung Seite 77