
*All brand names and product names are trademarks or registered trademarks of their respective companies.
Rev.1.00 2004.06 Page 25 of 135
M3T-100LCC-80QSB
Converter from 100-pin 0.65mm-pitch LCC to 80-pin 0.65mm-pitch QFP
(for M16C/60 Series)
REJ01J0001-0100Z
Rev.1.00
2004.04.16
Function
This converter connects a 100-pin 0.65mm-pitch LCC (100D0) to
the foot pattern for the 80-pin 0.65mm-pitch QFP (80P6S-A). Use
this board to convert packages from the 100-pin LCC package for
the M16C/60 Series MCU to the 80-pin QFP foot pattern.
Application
Solder the TQPACK080SB (included with the product) to the foot
pattern for 80-pin 0.65mm-pitch QFP (80P6S-A) provided on the
target. By attaching M3T-FLX-100LCC to the connector provided
on this board you can connect an emulation pod for the M16C/60
Series and this board.
Package Components
• M3T-100LCC-80QSB
• TQSOCKET080SBG (made by Tokyo Eletech Co., Ltd.)
• TQPACK080SB (made by Tokyo Eletech Co., Ltd.)
• User's manual
*Required components to connect to the target system are included with
this product package. Each component made by Tokyo Eletech Co., Ltd. is
optionally available alone from Tokyo Eletech Co., Ltd.
See Appendix G "Contact Addresses for Partner Products".
M3T-FLX-DCT613
Converter for Connecting 100-core Flexible Board FLX100 to
M3T-DIRECT80S or M3T-FLX-80QSB (for M16C/60 Series)
REJ01J0001-0100Z
Rev.1.00
2004.04.16
Function
This converter connects an emulation pod for the M16C/60 Series
to the connector provided at the top of the General-purpose
Product, M3T-FLX-80QSB or direct dummy IC,
M3T-DIRECT80S.
Application
Use this converter when you have M3T-DIRECT80S (for 80-pin
0.65mm-pitch QFP packages) mounted on the target system and
want to connect an emulation pod for the M16C/60 Series to the
target system.
[Ordering Information] See Appendix H "Ordering Information".
External View and Dimensions
External View and Dimensions
Foot Pattern Reference Dimensions
See Appendix E "List of TQPACK/NQPACK Foot Patterns Made
by Tokyo Eletech Co., Ltd."
[Ordering Information] See Appendix H "Ordering Information".
Kommentare zu diesen Handbüchern