Renesas FLASH Development Toolkit 3.07 Bedienungsanleitung PDF herunterladen (Seite 48)

3.5.6

Generic Boot - Confirmation

FDT then waits for you to confirm that the device is connected and powered, and if not using the FDM or

E8Direct, in Boot mode. FDT will try to connect to the device when you click ‘OK’.

Figure 3-21 Generic Boot Confirmation

After this, FDT displays a dialog that displays the boot progress. At various points during the Generic Boot

process, the user is required to select or confirm details of the device; see below for details.

3.5.7

Generic Boot – Select Device

Because some devices share a boot program, a list is provided of all those supported. The user should select

the correct device from the list then click ‘OK’.

Figure 3-22 Generic Boot – Device

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 145 146

Keine Kommentare

Renesas FLASH Development Toolkit 3.07 Bedienungsanleitung Seite 48