Renesas SH7286 Technical Information Seite 1

To our customers, Old Company Name in Catalogs and Other Documents On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology C

4.3.Human Interface Device Class The HID class as the name suggests is commonly used for things like keyboards, mice and joysticks where a human’s ac

4.4.Communication Device Class The CDC ACM allows a host to see a device as a standard serial (COM) port. This is particularly useful when working wi

4.5.Mass Storage Class The MSC class has become a very popular way for devices, such as cameras and USB Pens, to share data with PCs. The reason for

Chapter 5.Applications 5.1.Introduction to Applications The following sections introduce the sample applications that can be used to demonstrate each

12 Input Report: Byte 1 Bit 0 = LED status. Bit 1 = ADC value valid indicator. Bit 2 = Switch pressed indicator. Byte 2-5 = 32 bit, little endian AD

5.3.Communications Device Class Application The CDC sample application demonstrates communication with a Windows PC using a standard terminal program

Either type or browse to the location of the CDC project you have generated and built. Press next to install the CDC support. During the installati

Pressing SW1 on the RSK will stop this repeating message and will bring up the main menu as shown below. To demonstrate two-way communication press S

Mass Storage Class Demonstration The MSC sample demonstrates how a host can view a MSC device as an external drive. There is no additional applicatio

5.4.LibUSB The LibUSB sample application is functionally similar to the previous HID application. The difference is that this sample includes softwar

Notice 1. All information included in this document is current as of the date this document is issued. Such information, however, is subject to chang

1. The “Toggle LED” button enables a LED on the RSK to be toggled on and off. 2. The “Read ADC” button will command the RSK to read its ADC and ret

19 Chapter 6.Additional Information For details on how to use High-performance Embedded Workshop (HEW), refer to the HEW manual available on the CD o

Renesas Starter Kit2 for SH7286 USB Sample Code User's Manual Publication Date Rev.1.00 10.Nov.2008 Published

1753, Shimonumabe, Nakahara-ku, Kawasaki-shi, Kanagawa 211-8668 JapanRenesas Starter Kit2 for SH7286REG10J0158-0100USB Sample Code User’s Manual

Renesas Starter Kit2 for SH7286USB Sample Code User’s ManualUser’s ManualRev.1.00 2008.11RENESAS SINGLE-CHIP MICROCOMPUTERSH FAMILY

Table of Contents Table of Contents ...

Chapter 1. Preface Cautions This document may be, wholly or partially, subject to change without notice. All rights reserved. No one is permitted to

Chapter 2.Introduction The RSK USB sample code provides a basis for a developer to add USB device functionality to a system. It includes sample ap

Chapter 3.Development Environment 3.1.Sample Code Configuration The Sample code is provided as a project generator with the RSK. To create the sample

Chapter 4.USB Stack (Target) The USB software is implemented in the form of a USB stack comprising of three layers. At the top of the stack are the U

4.2.USBCore The USBCore layer handles standard USB requests common to all USB devices during the enumeration stage. This means that a developer can