Renesas FLASH Development Toolkit 3.07 Bedienungsanleitung PDF herunterladen (Seite 8)

CellCom/FreeSpeak Firmware Update Procedures

Rev: 6.05 VGC Part No.- 810372Z-MAN-6 Page 8 of 49

2.2.2 Beltpack DECT Updates

2.2.2.1 Preparing FS-BP MK I & PD2202 Beltpacks Only

To set a Beltpack into DECT download mode,

1) open the case (see the section on opening beltpacks) and set the DIP switches to

the following positions:

DIP Switch S5

DIP Switch S6

2) Run the DECT Loader  see the DECT Loader section further in this chapter.

3) The default/normal operating DIP switch positions are as follows:

DIP Switch S5

DIP Switch S6

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 48 49

Keine Kommentare

Renesas FLASH Development Toolkit 3.07 Bedienungsanleitung Seite 8