Renesas FLASH Development Toolkit 3.07 Bedienungsanleitung PDF herunterladen (Seite 43)

CellCom/FreeSpeak Firmware Update Procedures

Rev: 6.05 VGC Part No.- 810372Z-MAN-6 Page 43 of 49

Remove the front cover

by pulling it forward.

Apply pressure

towards the table on

the top (encoder part)

of the chassis to keep

the PCBs from lifting

as you remove the

front bodywork

Remove the 2 screws

holding the PCB by the

XLR connector

Separate the front and

rear parts of the

beltpack enough for

the connectors to clear

by lifting the boards

vertically. Be aware

that there are 3 boards

loosely connected

together. If possible lift

all 3 without separating

them.

Once you have cleared

the connectors, open

the unit like a clamshell

around the wiring as

not to stress the

cables, and rest on a

work surface The XLR

may rest loose

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 49

Keine Kommentare

Renesas FLASH Development Toolkit 3.07 Bedienungsanleitung Seite 43