Renesas SuperH SH7600 Series Technical Information PDF herunterladen (Seite 11)

Pin No. Signal

Note

11*

10, 12,

and 13

14*

TCK

/TRST

TDO

N.C.

TMS

TDI

/RES

N.C.

(GND)

UVCC

GND

Input/

Output*

Input

Output

Input

Output

GND

Output

Pin 1 mark

1. Input to or output from the user system.

2. The slash (/) means that the signal is active-low.

3. The emulator monitors the GND signal of the user system and

detects whether or not the user system is connected.

4. If the VccQ pin is not connected to the UVCC, the I/O voltage

of the user system interface will be fixed to 3.3 V.

5. The /ASEMODE pin must be 0 when the emulator is connected

and 1 when the emulator is not connected, respectively.

(1) When the emulator is used: /ASEMODE = 0

(2) When the emulator is not used: /ASEMODE = 1

To allow the /ASEMODE pin to be GND by connecting the user system

interface cable, connect pin 9 directly to the /ASEMODE pin. Do not ground the pin.

6. This pin can be connected to GND.

25.0

23.0

6 x 2.54 = 15.24

(2.54)

0.45

Pin 1

Pin 8

Pin 7

Pin 14

Pin 1 mark

H-UDI port connector

(top view)

H-UDI port connector

(top view)

Unit: mm

SH7619 Pin No.

P12

M14

N12

M13

M12

M15

Notes:

Some information on this page is revised on July 23, 2007.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 24 25

Kommentare zu diesen Handbüchern

Keine Kommentare

Renesas SuperH SH7600 Series Technical Information Seite 11

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Renesas SuperH SH7600 Series