Renesas SuperH SH7280 Series Bedienungsanleitung PDF herunterladen (Seite 88)

② Select Multi CH Mode

・ Check the “Enable Multi CH Mode” check box to set the "Multi CH Mode".

・ It is possible to Initialize/Upload/Download/Program by using maximum of ten S550-SFWv3 at the same

time. But "Multi Data Mode" and "Multi CH Mode" cannot be set at the same time. Moreover, it cannot be

used for programmed when "Multi CH Mode" and "FA Mode" are all set.

③ Other Settings

・ Please see "7.1.1.2 Maintenance Settings" for other settings.

7.2.1.3. Data Settings

Please see "7.1.1.3 Data Settings" for other settings.

7.2.1.4. Remote Programming

The following procedures show how to program the programming data stored in S550-SFWv3 to the target

(Program).

① Connect PC, S550-SFWv3 main unit and the target board

・ Connect PC and S550-SFWv3 with USB, and S550-SFWv3 and the target board with the target

connecting cable.

*For connection in remote programming mode, see “Connection for Remote Programming”.

② Confirm S550-SFWv3 start up

・ For the LED and buzzer status at the startup, see “9.2 LED Status List” and “9.3 Buzzer Sound List”.

Serial Flash Programmer[S550-SFWv3] Operation Manual 87

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 119 120

Keine Kommentare

Renesas SuperH SH7280 Series Bedienungsanleitung Seite 88