Renesas SuperH SH7280 Series Bedienungsanleitung PDF herunterladen (Seite 16)

4.3. Connection for Remote Programming

The connection when you program remotely to the target from the PC using the control software though

S550-SFWv3 is illustrated below.

The power may be supplied externally or by S550-SFWv3. For power supply method, see “6.2.1 Device Setting

Screen”.

* When the consumption current of the target board exceeds 200mA, supply from an external power supply.

 (When supplying voltage to the target board using an external power supply – Single CH Mode)

SFWv3 control

software

Target connection cable

Your target

board

External

power supply

S550-SFWv3

USB cable

(OS: Windows 7(32bit/64bit),

Vista, XP, 2000)

Vcc

* Turning ON/OFF the power of S550-SFWv3 is done by plugging/unplugging the USB cable.

* Turn on the external power supply after connecting the USB cable.

* Do not unplug the USB cable during the communication with the control software.

Serial Flash Programmer[S550-SFWv3] Operation Manual 15

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 119 120

Keine Kommentare

Renesas SuperH SH7280 Series Bedienungsanleitung Seite 16