Renesas R8C/17 Betriebsanweisung Seite 42

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 97
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 41
35
SmartBook for Renesas R8C/Tiny Microcontrollers
www.MightyMicons.com
Chapter 4. Addressing Modes
4.1 Introduction:
The facility to define the data that should be operated on and the target memory
location plays an important role in the instruction set of the microcontrollers.
With more options, the instruction set becomes very friendly to the system
designers. The instruction set of the R8C/Tiny micons sports versatile and flexible
addressing modes to empower the designers take control on the program flow
without much efforts.
The micons have three types of addressing: General instruction addressing,
Special instruction addressing and Bit instruction addressing. Because of this,
the designers can access any memory location in the address range of 00000H to
FFFFFH in many ways. In addition, the bit location of all the bytes within this
range can also be defined and used in the processing.
Within the general instruction addressing group, following are the options:
1. Immediate.
2. Register direct.
3. Absolute.
4. Address register indirect.
5. Address register relative.
6. SB relative.
7. FB relative.
8. Stack pointer relative.
When using immediate kind of addressing, the
data that is to be operated on should be
included within the instruction structure.
This immediate data can be represented
in many formats: single byte, 16 and 20
bits. For the register direct mode, the
contents of the registers R0-R3 and A0,
A1 become data for the operations.
The
instruction set of
the R8C/Tiny micons
sports versatile and flexible
addressing modes to empower the
designers take control on the pro-
gram flow without much efforts. The
designers can access
any memory location
in the address range of
00000H to FFFFFH in
many ways.
D
a
t
a
4
D
e
s
i
g
n
Seitenansicht 41
1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 96 97

Kommentare zu diesen Handbüchern

Keine Kommentare