Renesas H8S/2378F Technical Information PDF herunterladen (Seite 141)

117

5.2.15 STEP_INTERRUPT: SI

Description:

Sets or displays the enable or disable status of interrupts during step execution. When interrupts

occur when they are disabled, execution stops at the top address of the interrupt routine.

Format:

Displays the enable or disable status of interrupts during step execution.

si <mode>

Sets the enable or disable status of interrupts during step execution.

Table 5.16 STEP_INTERRUPT Command Parameter

Parameter Type Description

<mode> Keyword Enables or disables interrupts during step execution.

Set either of the following:

enable: Enables interrupts.

disable: Disables interrupts.

Example:

To enable interrupts during step execution:

si enable (RET)

To display interrupt status during step execution:

si (RET)

Emulator step interrupt mode = ENABLE

1 2 ... 136 137 138 139 140 141 142 143 144 145 146 ... 169 170

Keine Kommentare

Renesas H8S/2378F Technical Information Seite 141