Renesas Emulator System SH7362 Bedienungsanleitung PDF herunterladen (Seite 74)

E8a Emulator User's Manual 5. Debugging

R20UT0541EJ0601 Rev.6.01 Page 74 of 124

Aug 25, 2011

5.4.25 Deleting Break Conditions

Select a break condition and choose [Delete] from the popup menu to remove the selected break condition. To retain the

break condition but not have it cause an event when its conditions are met, use the [Disable] option (see section 5.4.24,

Disabling Break Conditions).

5.4.26 Deleting All Break Conditions

se [Delete All] from the popup menu to remove all break conditions.

5.4.27 Viewing the Source Line

for

Break Conditions

Select a break condition and choose [Go to Source] from the popup menu to open the [Source] or [Disassembly] window

at the address of the break condition. The [Go to Source] menu is only available when one break condition that has the

corresponding source file is selected.

5.4.28 [Break condition x] Dialog Box

Figure 5.8 [Break condition 3] Dialog Box

This page sets the address bus, data bus, and read/write cycle conditions.

Note: The items that can be set in this dialog box differ depending on the product. For the settings for each product, refer

to the online help.

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 123 124

Keine Kommentare

Renesas Emulator System SH7362 Bedienungsanleitung Seite 74