Renesas Emulator System E8 Technical Information PDF herunterladen (Seite 37)

When the [Enable advanced setting] check box is selected, it is possible to specify the specific address position in the

user flash-memory area. The E8 firmware is assigned in the 2-Kbyte area that is shown in the field for setting the

address on the dialog box.

Figure 6.13 Setting an Address to Assign the E8 Firmware (Advanced Setting)

(4) The [Communication Baud Rate] dialog box will appear. Select the communication baud rate, from the pull-down

menu, between the E8 emulator and the MCU and click the [Finish] button. Here, 500000 bps is selected as the baud

rate; usually, this default value needs not be changed.

Figure 6.14 Selecting the Communication Baud Rate

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 54 55

Keine Kommentare

Renesas Emulator System E8 Technical Information Seite 37