Renesas Emulation Pod for M16C/80 Group MCUs M30803T-RPD-E Technical Information PDF herunterladen (Seite 28)

( 26 / 74 )

Table 3.1 Switch settings of the M30803T-RPD-E (1/3)

Signal Switch Setting Description

P87/XCIN

P86/XCOUT

SW1

SW2

OUT

RDY*/

HOLD*

SW3

SW4

Connects the P87/X

CIN pin of MCU to the target

system (uses the P87/X

CIN pin as Port P87).

Connects the P87/X

CIN pin of MCU to the sub-clock

oscillator circuit (32.768 kHz) on the emulation

pod.

Connects the P86/XCOUT pin of MCU to the target

system (uses the P86/XCOUT pin as Port P86).

Connects the P86/XCOUT pin of MCU to the target

system (uses the P86/XCOUT pin as XCOUT).

OUT pin of MCU is unconnected.

Connects the XOUT pin of MCU to the target system.

Pulls up the RDY* and HOLD* pins of MCU with a

resistance of 33 kΩ.

Be sure to set this when using the emulation pod

while not connecting the target system.

Connects the RDY* and HOLD* pins of MCU to the

target system.

P86/XCOUT pin of MCU is unconnected.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 75 76

Keine Kommentare

Renesas Emulation Pod for M16C/80 Group MCUs M30803T-RPD-E Technical Information Seite 28