Renesas SH7781 Technical Information PDF herunterladen (Seite 38)

Section 3 Preparing to Connect the Trace Unit

Rev. 2.00 Jan. 28, 2008 Page 30 of 32

REJ10J1422-0200

3.2.6 Layout of the Trace Unit Connector

When designing the user system, there are restrictions on the position to install the trace unit

connector. Figure 3.4 shows the external dimensions of the trace unit.

The size of the printed-circuit board of the E200F trace unit is 90 mm × 125 mm. The size of

components around the user system connector must not exceed the limit on component installation

(the height must be 10 mm or less).

Trace bus interface connector

(SAMTEC QSH-090-01-L-D-A: 180 pins)

125

179

180

Unit: mm

Figure 3.4 External Dimensions of the Trace Unit (on which the Connector is Installed)

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 44

Keine Kommentare

Renesas SH7781 Technical Information Seite 38