Renesas H8S/2128 Series Technical Information Seite 1

To our customers, Old Company Name in Catalogs and Other Documents On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology C

IIILIMITED WARRANTYHitachi warrants its emulator products to be manufactured inaccordance with published specifications and free from defects inmateri

IVState Law:Some states do not allow the exclusion or limitation of implied warranties or liability forincidental or consequential damages, so the abo

VSAFETY PAGEREAD FIRST READ this user's manual before using this emulator product. KEEP the user's manual handy for future reference.Do

VIWARNINGObserve the precautions listed below. Failure to do soObserve the precautions listed below. Failure to do soObserve the precautions lis

iPrefaceThank you for purchasing the H8S/2148, H8S/2138, H8S/2128 series, H8S/2149, H8S/2169,H8/3577, H8/3567 series E6000 emulator.The H8S/2148, H8S/

iiContentsSection 1 Overview...11.1 Environment Conditions...

iiiFiguresFigure 2.1 Default User System Interface Circuit...8Figure 2.2 Use

1Section 1 OverviewThe H8S/2148, H8S/2138, H8S/2128 series H8S/2149, H8S/2169 and H8/3577, H8/3567 seriesE6000 emulator (hereafter referred to as th

21.21.21.21.2 Supported MCUs and User System Interface CablesSupported MCUs and User System Interface CablesSupported MCUs and User System Interface C

Notice 1. All information included in this document is current as of the date this document is issued. Such information, however, is subject to chang

3H8S/2128 Series:H8S/2128 Series:H8S/2128 Series:H8S/2128 Series:Table 1.4 H8S/2128 Series MCUs and User System Interface CablesNo.MCU TypeNumber Pack

4H8/3577 Series:H8/3577 Series:H8/3577 Series:H8/3577 Series:Table 1.7 H8/3577 Series MCUs and User System Interface CablesNo.MCU TypeNumber Package E

51.31.31.31.3 Operating Voltage and Frequency SpecificationsOperating Voltage and Frequency SpecificationsOperating Voltage and Frequency Specificatio

6Table 1.10 Clock SelectionsClock CommandParameterConfigurationDialog Box Setting Notes8 8 MHz internal clock10 10 MHz internal clock Default12 12.5 M

7Section 2 User System InterfaceAll user system interface signals are directly connected to the MCU in the E6000 with no bufferingexcept for those l

8Default:Default:Default:Default:Figure 2.1 Default User System Interface CircuitMode Pins (MD1 and MD0) and NMI: Mode Pins (MD1 and MD0) and NMI

9AN0 to AN7, DA0, DA1, AVcc, AVss, and Vref:AN0 to AN7, DA0, DA1, AVcc, AVss, and Vref:AN0 to AN7, DA0, DA1, AVcc, AVss, and Vref:AN0 to AN7, DA0, DA1

10Section 3 Notes on Use3.13.13.13.1 I/O Register Differences between Actual MCU and E6000I/O Register Differences between Actual MCU and E6000I/O R

113.33.33.33.3 Support of Flash MemorySupport of Flash MemorySupport of Flash MemorySupport of Flash MemoryThe E6000 does not emulate the flash memory

Regarding the change of names mentioned in the document, such as Hitachi Electric and Hitachi XX, to Renesas Technology Corp.The semiconductor operati

13Section 4 HDI Parameters4.14.14.14.1 Address AreasAddress AreasAddress AreasAddress AreasTable 4.1 lists the parameters for address areas (Area) t

144.24.24.24.2 Access StatusAccess StatusAccess StatusAccess StatusTable 4.2 lists the parameters for access status (Status) that can be specified wit

154.34.34.34.3 I/O Module SelectionI/O Module SelectionI/O Module SelectionI/O Module SelectionTable 4.3 lists the I/O modules that can be selected as

16Section 5 Diagnostic Test ProcedureThis section describes the diagnostic test procedure using the E6000 test program.5.15.15.15.1 System Set-UpSys

175.2 Diagnostic Test Procedure Using the Test ProgramInsert the CD-R (HS2148EPI61SR supplied with the E6000) into CD-ROM drive of the hostcomputer by

18It will take about 11 minutes to execute the test program when the host computer usingWindows®95 runs at 166 MHz and the PCMCIA interface card is us

19SIMM No SIMM module insertedShows whether the SIMMmemory board isinstalled.Downloading firmware ...Loading the test program.01) Testin

20Decode Test. page range H'000 - H'04f ...OKShows the results ofdecoding test for thetrace RAM (last half) in theE6000 (normal compl

2110) Testing Emulation RAM Hardware Break :Shows the check resultsSetting up, please wait..for the illegal access breakGRD Break ...

2216) Testing PERM_GA :Shows the check resultsSetting up, please wait..for the performanceA)Time Measure Test ...OKanalysis cont

H8S/2148, H8S/2138, H8S/2128 Series, H8S/2149, H8S/2169, H8/3577, H8/3567 Series E6000 Emulator HS2148EPI61HSupplementary Information16User’s ManualRe

Cautions1. Hitachi neither warrants nor grants licenses of any rights of Hitachis or any third partyspatent, copyright, trademark, or other intellec

IIMPORTANT INFORMATIONREAD FIRST READ this user's manual before using this emulator product. KEEP the user's manual handy for future

IITarget User of the Emulator Product:This emulator product should only be used by those who have carefully read and thoroughlyunderstood the informat