Renesas FLASH Development Toolkit 3.07 Bedienerhandbuch Seite 12
- Seite / 73
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
Introduction to Symmetry and M2150
6
Access Control Design Guide
ENVS
A four-camera digital video server (see page 26).
Table 1-2: M2150 Optional Modules
Device Picture Purpose
One-Port
RS232
module
A module (MN-232-1) that mounts onto a database unit to enable use of a
fall-back modem, bi-directional communications with an SMS PC, or
communications with a serial device such as an ENVS. The module is
necessary only if the integrated RS232 port is in use.
NIC4
module
A module that mounts onto a database unit to enable wired Ethernet
communications with an SMS PC. Encrypted and non-encrypted
communications versions are available.
NIC-WI
module
A module that mounts onto a database unit to enable wireless
communications with an SMS PC. The module supports 802.11b 128-bit
WEP and WPA encryption.
A separate aerial is provided with a magnetic base for placement on the
outside of the cabinet.
WIM
module
A module that mounts onto an 8DBC, 4DBC or 2DBC or door controller to
enable the use of Wiegand-interfaced readers. WIM-8, WIM-4 and WIM-2
variants are available.
Dual
RS485
module
A reader-interface module that mounts onto a 2DC or 2DBC to enable up
to two RS485 readers to be connected.
Quad
RS485
module
A reader-interface module that mounts onto a 4DC, 4DCN or 4DBC to
enable up to four RS485 readers to be connected.
8IN-4OUT
I/O
module
A module (known as the AC8/4 or MN-I/O) that mounts onto an 8DBC,
4DBC or 2DBC or door controller to enable connection to up to eight
monitor points and four auxiliary outputs.
4IN-8OUT
I/O
module
A module (known as the OC4/8) that mounts onto an 8DBC, 4DBC or
2DBC or door controller to enable connection to up to four monitor points
and eight auxiliary outputs.
- Access Control 1
- Design Guide 1
- Contents 3
- 1 Preface 5
- About Symmetry 7
- Symmetry M2150 7
- Summary of M2150 Components 9
- Access Control Design Guide 10
- Examples of Equipment Use 13
- M2150 System 14
- Siting of Elevator Nodes 20
- Cable Requirements 21
- Fireman's Switch 22
- Free/Secure Relay 22
- Tenant Security 22
- Federal Fire Code 23
- Choosing the Cabinets 24
- Planning Antipassback 26
- Selecting the Readers 28
- Using RS485 Readers 29
- Power for Door Releases 30
- Using Noise Suppression 30
- Choosing Cable Supervision 31
- Introduction 33
- AC Monitor 34
- Current Consumption @12Vdc 35
- Cable Supervision 37
- Six-State Supervision 38
- • Alarms controllers 38
- Business 39
- Professional 39
- Enterprise 39
- Software Sentinels Required 42
- Installation Requirements 43
- Procedures 44
- LEDs on the 4DBC 45
- LEDs on the 8DBC and 8DC 46
- LEDs on the 2DC 47
- LEDs on the 4DC 48
- LEDs on the DBU 49
- Fuse Ratings 50
- Updating Firmware 51
- Selecting Device shows 53
- Other Options at 58
- (UL) Compliance 60
- Electrical 62
- Standards 62
- Physical 62
- Environmental 63
- System Limits 63
- Card Readers 63
- E Index 69
- See Cabinet 70
- See Cable 73
Electrolux 8190 D 8260 manuals
Owner’s manuals and user’s guides for Unknown Electrolux 8190 D 8260.
We providing 1 pdf manuals Electrolux 8190 D 8260 for download free by document types: User Manual
Kommentare zu diesen Handbüchern