Renesas User System Interface Board HS7047ECH61H Bedienungsanleitung PDF herunterladen (Seite 7)

User Manual: RENESAS Flash Programmer

7 www.ngxtechnologies.com

(Windows is the 32-bit edition and the system drive is C:)

C:\Program Files\Common Files\Renesas Electronics CubeSuite+\

(Windows is the 64-bit edition and the system drive is C:)

C:\Program Files\Common Files (x86)\Renesas Electronics CubeSuite+\

(9) To change the folder of the installed tools, uninstall all the CubeSuite+ related software and the

programming GUI for RFP, and install them again.

(10) In the environment where the CubeSuite+, RFP, E1, E20, MINICUBE2 and USB driver for USB

Boot are installed the RFP, E1, E20, MINICUBE2 and USB driver for USB Boot are included in the

target software of the CubeSuite+ integrated uninstaller. If you don’t want to delete them, remove them

from the uninstallation targets.

2.3 Uninstallation

To uninstall the RFP package (RFP, USB driver, device information file, and utility), use “Add or

Remove Programs”(or “Programs and Features”) on the Control Panel. The CubeSuite+ integrated

uninstaller can also be used to uninstall the RFP package.

2.4 Updating RFP and Firmware

The firmware is a program embedded in the microcontroller for controlling E1, E20, or MINICUBE2.

Updating RFP and the firmware enables the following:

• Addition of newly supported functions or microcontrollers

• Correction of restrictions

For RFP and the firmware, use of the latest version is recommended to ensure correct operation of E1,

E20, and MINICUBE2.

The latest version of the firmware for RFP and MINICUBE2 can be checked and obtained at the

following websites:

Japanese: http://japan.renesas.com/rfp

English: http://www.renesas.com/rfp

How to check the firmware version and configure and update your system are described below.

For E1 and E20, check that RFP has the correct E1 and E20 firmware versions. If the firmware does not

match, the [Renesas Flash Programmer] dialog box will open. Click the Yes button to update.

Figure 2-1. Updating Firmware

For MINICUBE2, see MINICUBE2 Diagnostic Tools User’s Manual (U18588E) for how to check

the firmware version,and configure and update your system.

1 2 3 4 5 6 7 8 9 10 11 12 ... 28 29

Keine Kommentare

Renesas User System Interface Board HS7047ECH61H Bedienungsanleitung Seite 7