Renesas SuperH SH7200 Series Bedienungsanleitung PDF herunterladen (Seite 31)

Sequential Setting: Using the [Combination action (Sequential or PtoP)] dialog box specifies the

sequential condition and the start or end of performance measurement.

Table 2.10 Conditions to Be Set

Classification Item Description

[Ch1, 2, 3] list box Sets the sequential condition and the start or end of performance

measurement using Event Conditions 1 to 3 and 11.

Don’t care Sets no sequential condition or the start or end of

performance measurement.

Break: Ch3-2-1 Breaks when a condition is satisfied in the order of

Event Condition 3, 2, 1.

Break: Ch3-2-1,

Reset point

Breaks when a condition is satisfied in the order of

Event Condition 3, 2, 1.

Enables the reset point of Event Condition 11.

Break: Ch2-1 Breaks when a condition is satisfied in the order of

Event Condition 2, 1.

Break: Ch2-1,

Reset point

Breaks when a condition is satisfied in the order of

Event Condition 2, 1.

Enables the reset point.

I-Trace stop: Ch3-2-1 Setting is disabled in this MCU.

I-Trace stop: Ch3-2-1,

Reset point

Setting is disabled in this MCU.

I-Trace stop: Ch2-1 Setting is disabled in this MCU.

I-Trace stop: Ch2-1,

Reset point

Setting is disabled in this MCU.

Ch2 to Ch1 PA Sets the performance measurement period during

the time from the satisfaction of the condition set in

Event Condition 2 (start condition) to the

satisfaction of the condition set in Event Condition

1 (end condition).

Ch1 to Ch2 PA Sets the performance measurement period during

the time from the satisfaction of the condition set in

Event Condition 1 (start condition) to the

satisfaction of the condition set in Event Condition

2 (end condition).

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 51 52

Keine Kommentare

Renesas SuperH SH7200 Series Bedienungsanleitung Seite 31