Renesas Single-Chip Microcomputer M38C89T-ADF Bedienungsanleitung PDF herunterladen (Seite 13)

M38000T2-CPE User’s Manual Terminology

R20UT0213EJ0600 Rev.6.00 Page 13 of 82

Oct. 20, 2010

Terminology

Some specific words used in this user’s manual are defined as follows:

• Emulator M38000T2-CPE

This means the compact emulator (this product) for the 740 Family MCUs.

• Emulator system

This means an emulator system built around the M38000T2-CPE emulator. The M38000T2-CPE emulator system is

configured with an emulator main unit M38000T2-CPE, emulator MCU, user system, 740 Compact Emulator Debugger and

host machine.

• 740 Compact Emulator Debugger

This means a software tool starting up from the High-performance Embedded Workshop to control the emulator for the 740

Family and enables debugging. (In this user's manual, the 740 Compact Emulator Debugger may be represented as

"emulator debugger")

• Integrated development environment High-performance Embedded Workshop

This tool provides powerful support for the development of embedded applications for Renesas microcomputers. It has an

emulator debugger function allowing for the emulator controlled from the host machine via an interface. Furthermore, it

permits a range of operations from editing a project to building and debugging it to be performed within the same

application. What’s more, it supports version management.

• Firmware

This means a program stored in the flash ROM of the emulator. It analyzes contents of communication with the emulator

debugger and controls the emulator M38000T2-CPE. This program is downloadable from the emulator debugger to upgrade

the debugger, etc.

• Host machine

This means a personal computer used to control the emulator system.

• Emulator MCU

This means an MCU with a terminal for connecting the emulator. This is used by connected to the tip of this product (user

system side).

• Target MCU

This means the microcomputer you are going to debug.

• User system

This means a user’s application system using the microcomputer to be debugged.

• User program

This means a user’s application program to be debugged.

• #

This symbol indicates that a signal is active-low (e.g. RESET#).

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 81 82

Keine Kommentare

Renesas Single-Chip Microcomputer M38C89T-ADF Bedienungsanleitung Seite 13