Renesas REJ10J1837-0100 Installationsanleitung PDF herunterladen (Seite 6)

USB Basic Firmware <Short Sheet>

R01AN0495EJ0100 Rev.1.00 Page 6 of 32

Apr 15, 2011

2.1.3 Sample Application Operation Image

(1) When running the sample application on one RX62N RSK device

USB-BASIC-F/W operations can be confirmed by selecting PORT0_P_PORT1_H in the build configuration in the

HEW environment, as shown in the connection image below. The USB bus analyzer can be used to monitor the

transmission contents of the USB data transfer.

Figure . 2.2.Using one RX62N RSK Device

(2) When running the sample application on two RX62N RSK devices

Use one RX62N RSK for the USB host functions and the other for the USB peripheral functions. Select PORT0_P

and PORT1_H, respectively, in the HEW environment build configuration for each USB-BASIC-F/W, and execute the

program. Confirm operations as shown in the connection image below. The USB bus analyzer can be used as the

transmission contents of the USB data transfer.

RX62N RSK

USB

PORT0

RX62N USB Basic Firmware

(Select PORT1_H for the build

configuration)

RX62N RSK

USB

PORT1

RX62N USB Basic Firmware

Select PORT0_P for the build

configuration)

USB Host USB Peripheral

*Emulator connection has been abbreviated in this figure.

USB data

transfer

USB

PORT0

USB

PORT1

Figure . 2.3 Using two RX62N RSK Devices

1 2 3 4 5 6 7 8 9 10 11 ... 34 35

Keine Kommentare

Renesas REJ10J1837-0100 Installationsanleitung Seite 6