Renesas M16C/6V Bedienungsanleitung PDF herunterladen (Seite 14)

FLASHER 5 Manual 14

RAMCode does not

respond after start

byte

During download of RAMCode to ST9 CPU, target did not respond.

Check connection. Retry.

RAMCode does not

work

After download of RAMCode to ST9 target, RAMCode did not respond.

Check target CPU and connection to target. Retry.

RAMCode does not

respond command

After download of RAMCode to ST9 target, RAMCode did not respond

to commands. Check target CPU and connection to target. Retry.

202

Blank check failed

Target CPU is not blank.

203

Verify failed

Verification failed. Loaded Program and contents of target CPUs flash-

memory are not identical.

204

Clear target failed

Erase operation has failed.

205

Target auto func-

tion failed

Any error occurred during “Auto” function (Clear / Program / Verify)

206

Programming target

failed

An error occurred during programming of target. If target was not blank

before, ensure that target is erased before programming. Retry.

207

Reading target

failed

An error occurred during reading of target. Retry operation. Check

connection to target.

210

Could not open

source file

The source file given as parameter could not be opened. Check file

name or path.

211

Invalid Parameter.

Invalid command line parameter found.

212

Invalid parameter

count.

Check parameter. Refer to command description.

213

Invalid command

syntax.

Check parameter. Refer to command description.

214

Firmware mismatch

PC software version differs from firmware version of Flasher.

Download new firmware via Options menu. Otherwise proper function

can not be guaranteed.

215

The selected target

chip is not sup-

ported by the con-

nected programmer.

Check and setup device settings.

216

Session mismatch.

Resetting connec-

tion

It seemed, that Flasher was disconnected during communication be-

tween Flasher and PC. Try an other COM port.

217

Flasher refuses

connection..

Did you select a chip which is not supported ? Check device settings.

218

None of the se-

lected com ports is

available.

PC program could not open selected COM-Port. Select an other COM

port.

219

Error in HEX file

The HEX file for target could not be read. Check file format.

220

Invalid file exten-

sion, use .MOT,

.HEX or .BIN

You tried to open or save a Hex file with unsupported file extension.

221

Invalid file name

You tried to Open or merge a file that could not be found. Check file

name or path.

222

Error in Protocol

Manager

PC program internal error. Restart program.

223

VCCS > VCCSmax

(Target supply

voltage too

high...)

Supply voltage of target exceeds max value defined for selected de-

vice. Check device settings, connection to Flasher and target supply. If

everything is correct, Flashers voltage measurement circuitry seems to

be damaged and has to be repaired.

224

VCCS < VCCSmin

(Target supply

voltage too low

...)

Supply voltage of target is lower than min value defined for selected

device. Check device settings, connection to Flasher and target supply.

If everything is correct, Flashers voltage measurement circuitry seems

to be damaged and has to be repaired.

225

Flasher Input volt-

age too low

Flashers supply voltage is lower than required to generate program-

ming voltage of connected target CPU. Check supply voltage.

226

Assertion

PC program internal error. Restart and try again.

227

Invalid default

program settings

found. Please setup

device.

Your registry contained invalid data about Flasher PC program. Setup

device and other options.

228

Flasher not ready !

Setup data could not be sent to Flasher. Is a Flasher connected to your

PC? Check COM port.

229

Invalid commandline

option

Your command line parameter contains a command which is not sup-

ported.

230

Flasher defect !!!

Target interface

does not work.

Target interface of FLASHER not found during initialization. Flasher

has to be repaired.

1 2 ... 9 10 11 12 13 14 15 16 17 18

Kommentare zu diesen Handbüchern

Keine Kommentare

Renesas M16C/6V Bedienungsanleitung Seite 14

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Renesas M16C/6V