Renesas M30220T-PRB Technical Information PDF herunterladen (Seite 16)

( 14 / 36 )

Chapter 3. Setting Up

With this product, it is necessary to set the following according to your application system.

•X

CIN/XCOUT pins for the target system

• Mounting the A-D conversion bypass capacitor

3.1 Switch Settings

It is necessary to set the switches of the FLX64-PRB for debugging according to the target system.

Figure 3.1 shows the positions of the switches of the FLX64-PRB, and Table 3.1 shows the switch

settings.

Figure 3.1 Positions of the switches and their factory-settings

Table 3.1 Switch settings of FLX64-PRB

Function Switch setting

Switch No.

Selecting

CIN

JP1

Selecting

XCOUT

JP2

As this switch is not used for M30220T-PRB,

XCIN is always selected.

Used when XCOUT is connected to

the target system

(Factory-setting)

Used when XCOUT is not

connected to the target system

PORT

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 37 38

Keine Kommentare

Renesas M30220T-PRB Technical Information Seite 16