Renesas H8S/2168 Bedienungsanleitung PDF herunterladen (Seite 11)

2.1.3 Removing EIO Board 2 from Emulator

1. Remove four screws from the side of the emulator station.

2. Pull up and remove the cover of the emulator casing.

3. Remove two screws (M2.6

× 6 mm) from EIO board 2.

4. Remove EIO board 2 from connector P5 of the emulator station.

5. Remove the coaxial cable, which has been connected to EIO board 2, from a gutter of the

emulator station.

6. Set the cover of the emulator station and fasten four screws.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 28 29

Keine Kommentare

Renesas H8S/2168 Bedienungsanleitung Seite 11