Renesas H8/36024 Bedienungsanleitung

To our customers, Old Company Name in Catalogs and Other Documents On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology C

iPrefaceThank you for purchasing this user system interface cable (HS36014ECN61H) for the Renesas’original microcomputer H8/3694 group and H8/36014 gr

iiContentsSection 1 Configuration...1Section 2 Connection Proced

1Section 1 ConfigurationCAUTIONUse an NLPACK048SD socket (manufactured by TokyoEletech Corporation) for the TNP-48 package IC socketon the user sys

2Table 1 lists the HS36014ECN61H components. Please make sure you have all of thesecomponents when unpacking.Table 1 HS36014ECH64H ComponentsNo. Comp

3Section 2 Connection Procedures2.1 Connecting User System Interface Cable to Emulator StationWARNINGObserve the precautions listed below. Failure

4Figure 2 Connecting User System Interface Cable to Emulator Station

52.2 Connecting User System Interface Cable to User SystemWARNINGAlways switch OFF the user system and the emulatorproduct before the USER SYSTEM INTE

62.2.1 Installing IC SocketAfter checking the location of pin 1 on the IC socket fasten it to the user system before soldering.CAUTIONAfter confirming

72.2.2 Soldering IC SocketAfter fastening, solder the IC socket for a TNP-48 package to the user system.CAUTIONBe sure to completely solder the leads

82.2.4 Fastening Cable HeadCAUTION1. Use the screwdriver provided for tightening screws.2. The tightening torque must be 0.098 N•m or less.If the appl

Notice 1. All information included in this document is current as of the date this document is issued. Such information, however, is subject to chang

9Fasten the user system interface cable head to the IC socket for a TNP-48 package on the usersystem with the four screws (M2 x 10 mm) provided. Each

102.2.5 Fastening Cable BodyConnect the cable body to the cable head.Figure 5 Fastening Cable Body

112.3 Recommended Dimensions for User System Mount PadFigure 6 shows the recommended dimensions for the mount pad (footprint) for the user systemwith

122.4 Dimensions for User System Interface Cable HeadThe dimensions for the user system interface cable head are shown in figure 7.±Figure 7 Dimensi

132.5 Resulting Dimensions after Connecting User System Interface CableThe resulting dimensions, after connecting the user system interface cable head

14Section 3 Installing the MCU to the User SystemCAUTION1. Check the location of pin 1 before inserting.2. Use the screwdriver provided for tighteni

15Figure 9 Installing MCU to User System

16Section 4 Verifying Operation1. When using the H8/3694 group and H8/36014 group E6000 emulator (HS3664EPI61H), turnon the emulator according to th

17Figure 10 shows the system clock oscillator on the user system interface cable and the subclockinput specifications.ΩΩΩFigure 10 System Clock Osci

18Section 5 Notice1. Make sure that pin 1 on the user system IC socket is correctly aligned with pin 1 on the cablehead before inserting the cable h

H8/3694, H8/36014 Group TNP-48 User System Interface Cable for E6000 EmulatorUser’s ManualUser’s Manual Rev.1.0 2003.12HS36014ECN61H Renesas Microco

196. The P1 short connector is used for testing. Do not remove the inserted jumper pin. SW1 is aswitch provided for selection of the H8/3694 group or

H8/3694, H8/36014 Group TNP-48User System Interface Cable for E6000 Emulator User's ManualPublication Date: Rev.1.00, December 19, 2003Publishe

1753, Shimonumabe, Nakahara-ku, Kawasaki-shi, Kanagawa 211-8668 JapanH8/3694, H8/36014 Group TNP-48User System Interface Cable for E6000 EmulatorREJ1

CautionsKeep safety first in your circuit designs!1. Renesas Technology Corp. puts the maximum effort into making semiconductor productsbetter and mor

I? IMPORTANT INFORMATIONREAD FIRST• READ this user's manual before using this user system interface cable.• KEEP the user's manual handy for

IILIMITED WARRANTY Renesas warrants its user system interface cables to be manufacturedin accordance with published specifications and free from d

IIIState Law: Some states do not allow the exclusion or limitation of implied warranties or liability forincidental or consequential damages, so t

IVSAFETY PAGEREAD FIRST• READ this user's manual before using this user system interface cable.• KEEP the user's manual handy for future ref

VWARNINGObserve the precautions listed below. Failure to do sowill result in a FIRE HAZARD and will damage the usersystem and the emulator product or